ANSI/ASTM F1786-1997 烤肉炉性能试验方法

时间:2024-05-21 19:39:47 来源: 标准资料网 作者:标准资料网 阅读:8579
下载地址: 点击此处下载
【英文标准名称】:TestMethodforPerformanceofBraisingPans
【原文标准名称】:烤肉炉性能试验方法
【标准号】:ANSI/ASTMF1786-1997
【标准状态】:现行
【国别】:美国
【发布日期】:1997
【实施或试行日期】:
【发布单位】:美国国家标准学会(US-ANSI)
【起草单位】:ANSI
【标准类型】:()
【标准水平】:()
【中文主题词】:公共饮食业设备;烤架;家用设备;性能;试验方法;试验;物料通量
【英文主题词】:Cateringequipment;Grills;Householdequipment;Performance;Testmethod;Testing;Throughput
【摘要】:Thistestmethodevaluatestheenergyconsumptionandcookingperformanceofbraisingpans.Thefoodserviceoperatorcanusethisevaluationtoselectabraisingpanandunderstanditsenergyconsumptionandperformancecharacteristics.Note1-Braisingpansalsoarecommonlyreferredtoastiltingskillets.ThistestmethodusesthetermbraisingpaninaccordancewithSpecificationF1047.Thistestmethodisapplicabletoself-containedgasorelectricbraisingpans.Thebraisingpancanbeevaluatedwithrespecttothefollowing,whereapplicable:Maximumenergyinputrate(10.2)Capacity(10.3).Heatupenergyefficiencyandenergyrate(10.4).Productioncapacity(10.4).Simmerenergyrate(10.5).Surfacetemperatureuniformity,optional(10.6).Pilotenergyrate(10.7).Thevaluesstatedininch-poundunitsaretoberegardedasstandard.TheSIunitsgiveninparenthesesareforinformationonly.Thisstandarddoesnotpurporttoaddressallofthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitatio
【中国标准分类号】:Y68
【国际标准分类号】:97_040_60
【页数】:
【正文语种】:英语


基本信息
标准名称:鳞板输送机
英文名称:Apron conveyor
中标分类: 机械 >> 通用机械与设备 >> 输送机械
ICS分类: 材料储运设备 >> 连续搬运设备 >> 输送机
替代情况:替代JB/T 7013-1993
发布部门:中华人民共和国国家发展和改革委员会
发布日期:2008-03-12
实施日期:2008-09-01
首发日期:
作废日期:
提出单位:中国机械工业联合会
归口单位:北京起重运输机械研究所
起草单位:唐山起重输送机械厂;北京起重运输机械研究所
起草人:戴超元、张静祥
出版社:机械工业出版社
出版日期:2008-09-01
页数:10页
批文号:23299-2008
书号:15111·9198
适用范围

本标准规定了输送槽宽度为400~1250mm通用固定式鳞板输送机的型式、基本参数、尺寸、技术要求、试验方法、检验规则、标志、包装、运输和贮存。
本标准适用于以金属输送槽运载构件,沿水平或不大于45°倾角的直线或弧线线路,输送堆积密度在2500kg/m3以下,温度低于650°的块状和颗粒状松散物料的固定型式鳞板型板式输送机。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 机械 通用机械与设备 输送机械 材料储运设备 连续搬运设备 输送机
MIL-DTL-83517A, DETAIL SPECIFICATION CONNECTOR, COAXIAL, RADIO FREQUENCY FOR COAXIAL, STRIP OR MICROSTRIP TRANSMISSION LINE GENERAL SPECIFICATION FOR (27 OCT 2005) [SUPERSEDING MIL-C-83517]., This specification covers the general requirements and tests for radio frequency connectors used with coaxial, strip, or microstrip transmission line devices.